Painting vinyl siding


Vinyl is a popular and budget-friendly choice for home exteriors. Most people love it because of its low maintenance requirements.

And the material has gotten better over the years, benefiting from advancements in manufacturing. However, it is not invincible.

If your siding is looking worn or faded, you might consider painting your vinyl siding using the service of

Of course, painting vinyl siding is a large project, but it is not a particularly difficult one.
The instructions below will take you through the steps that, if you have painted anything before, will surely be familiar.


Before you head outdoors in preparation for this project, first consult the weather forecast for your area.

If you want to paint vinyl siding in ideal conditions, it means you have to wait for mild temperatures, low relative humidity and an overcast sky.

If the weather is too hot or too windy, the paint may not go on properly. It might look fine in the short term, however, paint applied on a humid, hot or gusty day may not adhere well and be more prone to cracking and flaking with time.


For a paint job to look good and also last on vinyl siding, the product must:

1. contain acrylic and urethane resins; Ingredients like these will accommodate the expansion and contraction of vinyl, thereby helping the coating to stick.

2. be lighter or be the same shade as the current color as darker colors retain more heat and this can leave the siding vulnerable to premature warping.


Clean the surface

This is the first step toward achieving a professional and quality paint job. You can’t just run the hose over the siding because this won’t cut it.

Your goal here is to remove all mildew, mold, chalky buildup and debris from the surface.

If you want a great result, use a cleaning solution with 1/3 cup laundry detergent, 1 quart liquid laundry bleach, 2/3 cup powdered household cleaner and 1 gallon water.

You can use a cloth or a soft-bristled brush to apply the cleaning solution before you paint the vinyl siding, then rinse off any remaining residue just to be sure.

Allow enough time for the siding to dry completely before going further.


It is not necessary to apply primer unless the original color has completely worn away.
Apply the paint with a roller or a paint sprayer. Save brushwork for corners and edges.

Coat the entire surface evenly, taking care not to apply too much paint in one section.

After the first coat and allow the paint to dry before continuing on to the second.
The second coat must be given enough time, at most 24 hours, to dry completely before the project can be considered complete.

Leave a Reply

Your email address will not be published. Required fields are marked *